Line Milling Machine LMC1000

X axis stroke 1000mm, Y axis stroke 400mm, Z axis stroke 250mm

LMC1000 Gantry Milling Machine

LMC seris typically used to mill flat pads of motor, turbine and pump, heat exchangers, aerospace machining.

Products Detail

  • X axis stroke 1000mm, Y axis stroke 400mm, Z axis stroke 250mm.
  • Various mounting options including switch magnet, bolting, chaining.
  • Can be mounted at any angle, including horizontal, vertical and upside down.
  • Different power units, including hydraulic, servo and pneumatic, can be selected according to the requirements of site conditions.
  • Ball screw feed allows for smoother feeding and improved accuracy.
  • Equipped with manual and automatic feed.
  • The arm can be used separatly as a line milling machine with 1000mm machining stroke.
  • Forged guide rails combine with aluminum sheets, allowing the whole machine to be light in weight but without losing precision.
  • Modular design makes the main bed, arm, spindle head transport, installation and removal easier.
  • Forged guide rails combine with aluminum sheets, allowing the whole machine to be light in weight but without losing precision.

PORTABLE DESIGN

For linear milling within 1000mm, LMA1000 can achieve the body weight of only 200KG, the accuracy can reach 0.02mm. It is unbeatable lightweight and precise.

MAIN BED

Main bed consist with:

  • 3000mm aluminum arm, intended to reduce the weight of the whole machine.
  • Double forged steel guide rails insterted in the aluminum arm, ensure the aluminum arm is light weight without losing rigidity.
  • Ball screw feeding system allows the X axis has a high precision feed.
  • The spindle head mounting plate, which allows adjustment of the angle, is fixed to the guide rail and screw.
  • One end of the aluminum arm is equipped with hydraulic, pneumatic, manual interfaces.
  • Standard and Magnetic mounting base are optional, standard base allows the machine be welded or bolted to the workpiece, magnetic base allows the machine quick attached to the workpiece by magnetic force.

MAIN BED

Main bed consist with:

  • 3000mm aluminum arm, intended to reduce the weight of the whole machine.
  • Double forged steel guide rails insterted in the aluminum arm, ensure the aluminum arm is light weight without losing rigidity.
  • Ball screw feeding system allows the X axis has a high precision feed.
  • The spindle head mounting plate, which allows adjustment of the angle, is fixed to the guide rail and screw.
  • One end of the aluminum arm is equipped with hydraulic, pneumatic, manual interfaces.
  • Standard and Magnetic mounting base are optional, standard base allows the machine be welded or bolted to the workpiece, magnetic base allows the machine quick attached to the workpiece by magnetic force.

MILLING SPINDLE HEAD

Z axis(Milling spindle head):

  • Allows 90° and 180° degree installation.
  • Equiped with digital scale.
  • Optional milling spindle head NT40 or NT50.
  • NT40: Face Mill diameter 160mm.
  • NT50: Face Mill diameter 200mm.

NT40

cutter diameter: 160mm

NT50

cutter diameter: 200mm

MOUNTING BASE

  1. Standard base: Connecting machine and workpiece by bolting or welding.
  2. Magnetic base: Attached the machine to the workpiece by magnetic force

Standard Base

connected machine and workpiece by bolting or welding

Magnetic Base

connected machine and workpiece by magnetic force

POWER SYSTEM

Hydraulic Power Unit (standard)

  • Three outputs for spindle rotation, X axis and Y axis feed.
  • Output power 26KW.
  • Hydraulic flow: spindle head 60L/min, X and Y axis feeding 20L/min.
  • Pressure (MPa): ajustable 0-15 MPa.
  • Power: Three-phase electric power, 220V380V480V575V optional.
  • Three hydraulic motor models are available:
Hydraulic Motor Model Milling RPM
160# 0-355 rpm
200# 0-305 rpm
250# 0-245 rpm

Hydraulic Station

Hydraulic Station Accessories

Pneumatic Power Unit(optional)

  • Three pneumatic motor for spindle rotation, X axis and Y axis feed.
  • One motor to drive the spindle rotation with a power of 3.7KW. Two motors to drive the X-axis and Y-axis feeds with a power of 0.89KW.
Pneumatic Motor (spindle rotation) Pneumatic Motor (feeding)
3.7KW 0.89KW
6-8 bar 6-8 bar
3.56m³/min 1.3m³/min

Pneumatic Motor (for spindle rotation)

3.7KW, 6-8 bar, 3.56m³/min

Pneumatic Motor (for feeding)

0.89KW, 6-8 bar, 1.3m³/min

TOOL PACK

  • Oiler, used to add lubricating grease to machine tools.
  • Hex Keys Set 1, apply to installation, disassembly and adjustment.
  • Hex Keys Set 2, apply to installation, disassembly and fine tuning.

Oiler

Hex Key Set 1

Hex Key Set 2

Code Name Unit Image
104511 Carbide Tip Box(10pcs)
00000 Hydraulic Motor pcs
00000 Quick Connector pcs

Portable Machine Tool Warranties

All new portable machine tools come with a 12 month warranty as standard. Of course, warranty cover does not mean that a machine tool does not need to be serviced, or that parts will not experience wear and tear and, as a consequence, may need to be replaced.

Extended 2 Year Machine Tool Warranties

Depending on a machine tool’s use and application, customers can also opt for an extended warranty to 2 years to provide extra peace of mind and which can help keep machine downtime and repair costs predictable, and to a minimum.

SHIPPING DATA

MODEL DIMENTION(MM) VOLUME(CBM) WEIGHT(KG)
LMA3000 Box1: 3700*580*780 1.67 600
Box2: 1080*940*1460 1.49 650
  TOTAL 3.16 1250

Box1

Machine body

Box2

Hydraulic station

Excellent precision

It can easily meet the flatness of 0.05mm within one meter and the roughness requirement of Ra3.2. This accuracy has plenty margin to meet the tolerance requirements of the on-site machining industry.

Rock-solid durability

The main stress-bearing parts are made of high-strength forged steel. The robust design and rock-solid reliability enable it to withstand long-term continuous work without any malfunction.

Affordability

Compare with traditional milling lathe，LMD3000 is the most affordable option, modular design allow it very economical to maintain.

Technical Data

CATEGORY ITEM LMC1000
STROKE X Axis(auto) 1000mm
Y Axis(manual) 400mm
Z Axis(manual) 250mm
AUTO FEED Hydraulic 20L/min
Pneumatic 0.89KW, 1.10 m³/min
Feed Rate 35-1000mm/min
MILLING SPINDLE Hydraulic 60L/min
Pneumatic 3KW 2.69 m³/min
Spindle Taper NT40 or NT50
Max Cutter Dia. 160mm(NT40) or 250mm(NT50)
Spindle R.P.M 0-740
POWER SYSTEM Hydraulic Station 22KW

PRODUCT BROCHURE

LMC SERIES LINE MILLING MACHINE

Download

You might also be interested in

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

TDG60 line boring

Learn More

Contact Us

How to select an appropriate portable on-site machining tool? Have you encountered challenges in making this decision? Key factors such as machining precision, machining efficiency, procurement budget, and post-sales support ought to be taken into consideration. Please get in touch with us, we are here for you! We offer global sales and service support, paired with professional sales representatives to assist in effectively resolving any issue.

WORLD HEADQUARTERS

Address: Singports

Phone:

Email: Info@turnafix.com

Please give us a call or complete the contact form, the regional sales manager will promptly reach out to you.